3.4.6-packet-tracer---configure-vlans-and-trunking---physical-mode

on

 TOPOLOGY 



Addressing Table



Pengertian Vlan

VLAN adalah singkatan dari Virtual Local Area Network . VLAN adalah teknologi jaringan komputer yang memungkinkan pemisahan jaringan fisik menjadi beberapa jaringan logis. Dimana hal ini memungkinkan seorang administrator jaringan membuat beberapa jaringan virtual untuk keperluan fleksibilitas dan skalabilitas.


langkah-langkah 

1. Tambahkan PC A dan B, lalu tambahkan Switch 1 dan 2



2. lalu setelah itu klik PC-A dan masukan ip address 



3. jika sudah masukan ip address, klik terminal di PC-A

langkah-langkah config


Switch>en
Switch#conf t
Switch(config)#hostname S1
S1(config)#enable secret class
Sl (config)#line console 0
S1(config-line)#password cisco
Sl (config-line)#login
S1(config-line)#logging synchronous
Sl (config-line)#
S1(config-line)#
Sl (config-line)#exit
S1(config)#line vty 14
Sl (config-line)#password cisco
S1(config-line)#login
Sl (config-line)#logging synchronous
S1(config-line)#banner motd # Unauthorized acces is strictly prohibited. #
Sl (config)#service password-encryption
S1(config)#no ip domain-name
Sl (config)#int vlan 99
Sl (config-if)#ip address 192.168.1.11 255.255.255.0
S1(config-if)#no sh
Sl (config-if)#vlan 10
S1(config-vlan)#name Operations
Sl (config-vlan)#vlan 20
S1(config-vlan)#name Parking_Lot
Sl (config-vlan)#vlan 99
Sl (config-vlan)#name Management
S1(config-vlan)#vlan 1000
Sl (config-vlan)#name Native
S1(config-vlan)#end



Sl#conf t
S1(config)#interface f0/6
S1(config-if)#switchport mode access
S1(config-if)#
S1(config-if)#switchport access vlan 10
S1(config-if)#interface vlan 1
S1(config-if)#no ip address
S1(config-if)#interface vlan 99
S1(config-if)#ip address 192.168.1.11 255.255.255.0
S1(config-if)#interface range f0/11-24
S1(config-if-range)#switchport mode access
S1(config-if-range)#switchport access vlan 99
S1(config-if-range)#interface f0/24
S1(config-if)#no switchport access vlan
S1(config-if)#interface f0/24
Sl (config-if)#switchport access vlan 30
S1(config-if)#interface f0/1
S1(config-if)#switchport mode dynamic desirable
S1(config-if)#switchport mode trunk
S1(config-if)#switchport trunk native vlan 1000


S1(config-if)#switchport mode trunk
S1(config-if)#switchport trunk native vlan 1000
S1(config-if)#interface f0/11
S1(config-if)#switchport access vlan 10
Sl (config-if)#interface f0/21
Sl (config-if)#switchport access vlan 10
S1(config-if)#end
Sl#conf t
Sl (config)#line vty 0 14
S1(config-line)#password cisco



4. klik PC-B lalu masukkan Ip Address



5. jika sudah masukan ip address, klik terminal di PC-B

langkah-langkah config

Switch>en
Switch#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Switch(config)#hostname S2
S2 (config)#enable secret class
S2 (config)#line console 0
S2 (config-line)#password cisco
S2 (config-line)#login
S2(config-line)#logging synchronous
S2 (config-line)#line vty 14
S2 (config-line)#password cisco
S2 (config-line)#login
S2 (config-line)#logging synchronous
S2 (config-line)#vlan 10
S2 (config-vlan)#name Operations
S2 (config-vlan)#vlan 20
S2 (config-vlan)#name Parking_Lot
S2 (config-vlan)#vlan 99
S2 (config-vlan) #name Management
S2 Iconfig-vlan)#vlan 1000



S2 (config-vlan)#name Native
S2 (config-vlan)#inteface vlan 99
S2 (config-vlan)#interface vlan 99
S2 (config-if)#ip address 192.168.1.12 255.255.255.0
S2 (config-if)#interface range f0/11-24 
S2 (config-if-range)#switchport mode access
S2 (config-if-range)#switchport access vlan 99
S2 (config-if-range)#interface f0/24
S2 (config-if)#switchport access vlan 30
S2 (config-if)#interface f0/1


S2(config-if)#switchport mode dynamic desirable
S2 (config-if)#switchport mode trunk
S2 (config-if)#switchport trunk native vlan 1000
S2 (config-if)#interface f0/18
S2 (config-if)#switchport access vlan 10
S2 (config-if)#exit
S2 (config)#service password-encryption
S2 (config)#exit
S2#copy running-config startup-config
S2#conf t
S2 (config)#line vty 0 14
S2 (config-line)#password cisco




Link Video Cisco Packet Tracer




Comments

Post a Comment